Flat Strip

Approx. Rs 515 / KgGet Latest Price

Stainless Steel 310 Flat Strip is a high-temperature, heat-resistant austenitic stainless steel product known for its excellent oxidation resistance and strength at elevated temperatures. It is widely used in furnace components, heat treatment equipment, and high-temperature structural applications.

• ASTM A240 / A276 Type 310

• UNS S31000

• EN 1.4845

• Chromium (Cr): 24.0 – 26.0

• Nickel (Ni): 19.0 – 22.0

• Carbon (C): Max 0.25

• Manganese (Mn): Max 2.0

• Silicon (Si): Max 1.5

• Phosphorus (P): Max 0.045

• Sulfur (S): Max 0.03

• Iron (Fe): Balance

• Tensile Strength: ≥ 515 MPa

• Yield Strength (0.2% Offset): ≥ 205 MPa

• Elongation: ≥ 40%

• Hardness: ≤ 95 HRB

Thickness: 0.5 mm to 12 mm
Width: 10 mm to 600 mm
Length: As per customer requirement (Coil / Cut Length)

Available in:

• Hot Rolled (HR)

• Cold Rolled (CR)

• Annealed & Pickled

• Bright Finish

• Excellent oxidation resistance up to 1100°C (intermittent service)

• High strength at elevated temperatures

• Good resistance to sulfidation

• Excellent fabrication and weldability

• Good resistance to thermal fatigue

• Furnace parts and heat treatment trays

• Kiln liners and burners

• Petrochemical processing equipment

• Heat exchangers

• Radiant tubes

• Boilers and pressure vessels (high temperature sections)

• Heat Treatment Industry

• Cement Plants

• Petrochemical Industry

• Power Generation

• Oil & Gas

• Chemical Processing

Additional Information:

Approx. Rs 225 / KgGet Latest Price

Grade: AISI 420
UNS: S42000
Material Type: Martensitic Stainless Steel
Product Form: Flat Bar
Condition: Annealed / Hardened & Tempered

Stainless Steel 420 Flat Bars are high-carbon martensitic stainless steel bars known for their high strength, good corrosion resistance, and excellent hardness after heat treatment. Grade 420 offers superior wear resistance compared to 410 and can be hardened to achieve high strength levels.

These flat bars are widely used in engineering components, industrial tools, pump shafts, valve parts, and cutting applications where hardness and moderate corrosion resistance are required.

• High hardness after heat treatment

• Good corrosion resistance in mild environments

• Excellent wear and abrasion resistance

• Good machinability in annealed condition

• Suitable for polishing and surface finishing

• Magnetic in all conditions

• Carbon (C): 0.15 – 0.40 %

• Chromium (Cr): 12.0 – 14.0 %

• Manganese (Mn): Max 1.0 %

• Silicon (Si): Max 1.0 %

• Phosphorus (P): Max 0.04 %

• Sulphur (S): Max 0.03 %

• Tensile Strength: Approx. 700 MPa

• Yield Strength: Approx. 450 MPa

• Hardness: Approx. 190–230 HB

(Higher hardness achievable after hardening & tempering)

• Thickness: 3 mm to 100 mm

• Width: 10 mm to 300 mm

• Length: 3 m / 6 m / Cut Length

• Custom sizes available on request

• ASTM A276

• ASTM A479

• EN 10088

• Black

• Bright

• Polished

• Ground Finish

• Pump shafts

• Valve components

• Surgical instruments

• Industrial knives & cutting tools

• Fasteners & engineering components

Additional Information:

Approx. Rs 215 / KgGet Latest Price

Material Grade: Stainless Steel 410
UNS: S41000
Product Type: Flat Bar
Shape: Rectangular / Flat
Condition: Annealed / Hardened & Tempered

410 Stainless Steel Flat Bar is a martensitic stainless steel product known for its good mechanical strength, moderate corrosion resistance, and excellent hardness after heat treatment. It offers a balanced combination of wear resistance and strength, making it suitable for applications requiring durability and moderate corrosion protection.

SS 410 flat bars are widely used in industrial, construction, automotive, and engineering applications where strength and machinability are important.

• High strength and hardness after heat treatment

• Good wear resistance

• Moderate corrosion resistance

• Good machinability

• Magnetic in all conditions

• Suitable for heat treatment

• Chromium (Cr): 11.5 – 13.5 %

• Carbon (C): Max 0.15 %

• Manganese (Mn): Max 1.0 %

• Silicon (Si): Max 1.0 %

• Phosphorus (P): Max 0.04 %

• Sulphur (S): Max 0.03 %

• Tensile Strength: ≥ 480 MPa

• Yield Strength: ≥ 275 MPa

• Elongation: ≥ 20 %

• Hardness: Approx. 95 HRB (Annealed)

• Thickness: 3 mm to 100 mm

• Width: 10 mm to 300 mm

• Length: 3 m / 6 m / Cut Length

• Custom sizes available on request

• ASTM A276

• ASTM A479

• ASME SA276

• Black

• Bright

• Polished

• Hot Rolled

• Pump shafts

• Valves & fasteners

• Surgical instruments

• Automotive components

• Oil & gas fittings

• General engineering components

Additional Information:

Approx. Rs 275 / KgGet Latest Price

Material Grade: SS 316
UNS: S31600
Product Type: Flat Bar
Shape: Rectangular / Flat
Finish: Hot Rolled / Cold Drawn

Stainless Steel 316 Flat Bars are molybdenum-bearing austenitic stainless steel products known for their excellent corrosion resistance, high strength, and superior performance in chloride environments. Compared to 304 grade, SS 316 offers enhanced resistance to pitting and crevice corrosion, making it ideal for marine, chemical, and industrial applications.

These flat bars are widely used in fabrication, structural supports, frames, flanges, base plates, and marine components.

• Excellent resistance to corrosion and pitting

• Superior performance in chloride environments

• Good mechanical strength and durability

• Excellent weldability and machinability

• Suitable for high-temperature applications

• Long service life with low maintenance

• Chromium (Cr): 16.0 – 18.0 %

• Nickel (Ni): 10.0 – 14.0 %

• Molybdenum (Mo): 2.0 – 3.0 %

• Carbon (C): Max 0.08 %

• Iron (Fe): Balance

• Tensile Strength: ≥ 515 MPa

• Yield Strength: ≥ 205 MPa

• Elongation: ≥ 40 %

• Width: 10 mm to 300 mm

• Thickness: 3 mm to 100 mm

• Length: 3 m / 6 m / Custom Cut Length

• ASTM A276

• ASTM A479

• ASME SA276

• ASME SA479

• Chemical processing equipment

• Marine and coastal structures

• Oil & gas industry

• Food processing equipment

• Construction and fabrication works

Additional Information: