Stainless Steel Pipes And Tubes

Approx. Rs 700 / KgGet Latest Price

Approx. Rs 471 / KgGet Latest Price

Approx. Rs 525 / KgGet Latest Price

316 stainless steel , also known as UNS S31600 and Grade 316, is an austenitic stainless steel whose major alloying elements include chromium, nickel and molybdenum. The addition of molybdenum (not found in Stainless Steel 304) is the component which gives Stainless Steel 316 increased resistance in highly corrosive surroundings such as salt water or chloride environments. Stainless Steel 316 offers better creep resistance at higher temperatures and greater strength than Stainless Steel 304. In the annealed state, Stainless Steel 316 is non-magnetic but can become slightly magnetic if extensively cold worked, further annealing would be necessary to correct this. Stainless Steel 316 cannot be hardened using thermal treatment. However, by cold working Stainless Steel 316, hardness and strength can be significantly increased.

UNS S31600/S31603 commonly known as Stainless Steel 316/316L Dual Certified is the low carbon content version of Stainless Steel 316. Stainless Steel 316/316L Dual Certified is used in heavy-gage welded products (over approximately 6mm). One advantage over Stainless Steel 316 is that it is more resistant to carbide precipitation and can be used in the 797° F-1580° F range, which is more suitable for applications involving corrosion resistance.

• Architectural (in corrosive environments)
• Chemical
• Marine
• Mining
• Petroleum
• Pharmaceutical
• Pulp and Paper
• Textile
• Transportation
• Water filtration

Approx. Rs 405 / KgGet Latest Price

Additional Information:

Approx. Rs 600 / KgGet Latest Price

Additional Information:

Approx. Rs 515 / KgGet Latest Price

Approx. Rs 450 / KgGet Latest Price

Approx. Rs 610 / KgGet Latest Price

Stainless Steel Grade 310 (UNS S31000) is an austenitic stainless steel developed for applications that come in contact with high temperatures and require good corrosion resistance. The alloy resists oxidation up to 2010°F (1100°C) under mildly cyclic conditions. Due to the materials high chromium and moderate nickel content, Alloy 310 is resistant to sulfidation and is also used in moderately carburizing atmospheres. Atmospheres with more severe carburizing of thermal process equipment will typically require nickel alloys.

Stainless Steel Grade 310 can also be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, however, the maximum service temperature has to be reduced. Alloy 310 can also be utilized in cryogenic applications with low magnetic permeability and toughness down to -450°F (-268°C).

Additional Information:

Approx. Rs 420 / KgGet Latest Price

Approx. Rs 430 / kgGet Latest Price

Approx. Rs 455 / KgGet Latest Price

316L seamless pipes are premium-grade stainless steel pipes known for their excellent corrosion resistance, high durability, and superior strength. These pipes are widely used in industries that require high-performance materials in harsh environments.

✅ Material: Made from 316L stainless steel, a low-carbon version of 316 stainless steel, ensuring better weldability and corrosion resistance.
✅ Corrosion Resistance: Highly resistant to chlorides, acids, and saltwater, making it ideal for marine, chemical, and pharmaceutical applications.
✅ Strength & Durability: Designed to withstand high pressure and extreme temperatures while maintaining structural integrity.
✅ Seamless Construction: Manufactured without welding joints, making the pipe stronger and more reliable for critical applications.
✅ Standards & Specifications: Conforms to ASTM A312, ASTM A269, ASTM A213, available in various schedules (SCH 10, 40, 80, etc.).

�� Oil & Gas Industry
�� Chemical & Petrochemical Plants
�� Marine & Shipbuilding
�� Food & Beverage Processing
�� Pharmaceutical & Biotechnology
�� Heat Exchangers & Boilers

✔ Premium-quality stainless steel products
✔ Competitive pricing and bulk availability
✔ On-time delivery & customized solutions
✔ Serving industries worldwide

Would you like details on sizes, pricing, or a quotation?

Additional Information:

Approx. Rs 1,250 / KgGet Latest Price

904L is a high-alloy austenitic stainless steel known for its excellent corrosion resistance, especially in acidic environments. It contains significant amounts of nickel, chromium, molybdenum, and copper, which enhance its durability and resistance to pitting and crevice corrosion.

1. Corrosion Resistance: Particularly effective against sulfuric acid and chlorides, making it suitable for chemical processing industries.

2. Mechanical Properties: Offers good mechanical strength and toughness at both ambient and elevated temperatures.

3. Weldability: Easily welded without the risk of corrosion in the heat-affected zones, making it versatile for various applications.

4. Applications: Commonly used in industries such as oil and gas, pharmaceuticals, pulp and paper, and seawater applications.

5. Standards: Typically conforms to ASTM A312 for seamless and welded pipes.

6. Formability: Good workability allows it to be formed into various shapes and sizes.

Due to these properties, 904L is an ideal choice for environments that demand high corrosion resistance and structural integrity.

Approx. Rs 540 / KgGet Latest Price

316 stainless steel , also known as UNS S31600 and Grade 316, is an austenitic stainless steel whose major alloying elements include chromium, nickel and molybdenum. The addition of molybdenum (not found in Stainless Steel 304) is the component which gives Stainless Steel 316 increased resistance in highly corrosive surroundings such as salt water or chloride environments. Stainless Steel 316 offers better creep resistance at higher temperatures and greater strength than Stainless Steel 304. In the annealed state, Stainless Steel 316 is non-magnetic but can become slightly magnetic if extensively cold worked, further annealing would be necessary to correct this. Stainless Steel 316 cannot be hardened using thermal treatment. However, by cold working Stainless Steel 316, hardness and strength can be significantly increased.

UNS S31600/S31603 commonly known as Stainless Steel 316/316L Dual Certified is the low carbon content version of Stainless Steel 316. Stainless Steel 316/316L Dual Certified is used in heavy-gage welded products (over approximately 6mm). One advantage over Stainless Steel 316 is that it is more resistant to carbide precipitation and can be used in the 797° F-1580° F range, which is more suitable for applications involving corrosion resistance.

• Architectural (in corrosive environments)
• Chemical
• Marine
• Mining
• Petroleum
• Pharmaceutical
• Pulp and Paper
• Textile
• Transportation
• Water filtration

Additional Information:

Approx. Rs 220 / KgGet Latest Price

Approx. Rs 500 / KgGet Latest Price

Duplex 1.4462 (also known as UNS S31803/S32205) seamless pipes are made from a duplex stainless steel alloy with a balanced microstructure of austenite and ferrite. These pipes are widely used in industries requiring high strength, corrosion resistance, and durability.

• Corrosion Resistance: Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking, especially in chloride-rich environments.
• High Strength: Almost twice the yield strength of austenitic stainless steels like 304 and 316.
• Good Weldability & Formability: Can be welded using standard welding techniques, though post-weld heat treatment may be required in some cases.
• Temperature Resistance: Performs well in temperatures up to 250°C.

• Oil & Gas Industry (offshore and onshore pipelines)
• Chemical Processing
• Marine & Shipbuilding
• Desalination Plants
• Heat Exchangers
• Pulp & Paper Industry

• Standards: ASTM A790, ASTM A789, EN 10216-5
• Sizes: Varies from small-diameter precision tubes to large-diameter pipes
• Wall Thickness: Schedule 10, 40, 80, etc.
• Surface Finish: Annealed & pickled, polished, or custom finishes

Additional Information:

Approx. Rs 1,200 / KgGet Latest Price

Approx. Rs 495 / KgGet Latest Price

Approx. Rs 811 / KgGet Latest Price

Approx. Rs 170 / KgGet Latest Price

Additional Information:

Approx. Rs 565 / KgGet Latest Price

Approx. Rs 540 / KgGet Latest Price

Approx. Rs 330 / KgGet Latest Price

Approx. Rs 285 / kgGet Latest Price

Approx. Rs 380 / KgGet Latest Price

316 ERW (Electric Resistance Welded) stainless steel pipe is a high-quality, corrosion-resistant pipe made from 316-grade stainless steel, which contains molybdenum for enhanced resistance to pitting and crevice corrosion, especially in marine and chemical environments.

✅ Corrosion Resistance: Superior to 304 stainless steel, especially in chloride-rich environments (e.g., seawater, chemical processing).
✅ Strength & Durability: Good mechanical properties and high-temperature resistance.
✅ Weldability: Manufactured using ERW welding, providing strong, consistent welds without filler metal.
✅ Chemical Composition (approximate):

• Chromium (Cr): 16-18%
• Nickel (Ni): 10-14%
• Molybdenum (Mo): 2-3% (enhances corrosion resistance)
• Carbon (C): ≤ 0.08%
• Manganese (Mn): ≤ 2%

316 ERW pipes come in a range of diameters (½" to 24" and above) and wall thicknesses (SCH 10, SCH 40, SCH 80, etc.) based on industry standards like ASTM A312, A249, and A269.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Approx. Rs 350 / KgGet Latest Price

Additional Information:

Approx. Rs 285 / kgGet Latest Price

Approx. Rs 285 / kgGet Latest Price

Approx. Rs 551 / kgGet Latest Price

Approx. Rs 285 / kgGet Latest Price

Approx. Rs 285 / kgGet Latest Price

Approx. Rs 285 / kgGet Latest Price

Approx. Rs 350 / KilogramGet Latest Price

Approx. Rs 385 / KgGet Latest Price

Approx. Rs 250 / KgGet Latest Price

Approx. Rs 100 / kgGet Latest Price