Steel Plates

Approx. Rs 110 / KgGet Latest Price

NM 400 is a wear-resistant steel plate with a nominal hardness of 400 HBW (Brinell Hardness). The "NM" stands for “Nai Mo” (耐磨) in Chinese, meaning wear-resistant. It is widely used in industries requiring protection against severe abrasion and wear, while still offering reasonable toughness and weldability.

• Hardness: ~360 – 440 HBW

• Thickness Range: 3 mm – 80 mm (depending on supplier)

• Tensile Strength: 1250 – 1450 MPa

• Yield Strength: ≥ 900 MPa (varies with thickness)

• Elongation (A5): 10–12%

• Impact Toughness: Maintains strength and toughness at low temperatures

• High abrasion and wear resistance

• Good mechanical strength

• Decent weldability and machinability with correct procedure

• Long service life in wear-prone machinery

• Cost-effective compared to other wear plates

NM 400 plates are used in industries that deal with high friction, sliding, and impact wear, including:

• Mining & quarrying equipment

• Truck bodies, tippers & hoppers

• Excavator, loader & bulldozer buckets

• Crushers, screens & feeders

• Cement & asphalt plants

• Chutes, conveyors & liners

• Recycling & demolition machinery

• Hardox 400 (Sweden)

• Abrex 400 (Japan)

• Raex 400 (Finland)

• Dillidur 400V (Germany)

• Rockhard 400  (INDIA)

Additional Information:

Approx. Rs 135 / KgGet Latest Price

NM 500 is a wear-resistant steel plate with a nominal hardness of about 500 HBW (Brinell Hardness). The "NM" stands for “Nai Mo” (耐磨) in Chinese, meaning wear-resistant. Compared to NM 400, NM 500 offers higher hardness and superior abrasion resistance, making it ideal for applications with extreme wear and sliding impact.

It balances wear resistance, strength, and moderate toughness, but due to higher hardness, it requires proper cutting, welding, and processing techniques.

• Hardness: 470 – 530 HBW

• Thickness Range: 4 mm – 80 mm (depending on mill)

• Tensile Strength: 1550 – 2000 MPa

• Yield Strength: ≥ 1200 MPa

• Elongation (A5): 7–10%

• Impact Toughness: Good at room temperature, moderate at sub-zero conditions

• Very high abrasion and wear resistance

• Longer service life compared to NM 400 plates

• High strength-to-weight ratio

• Reduced downtime & maintenance costs in wear-heavy applications

• Can be welded and formed with proper preheating & procedures

NM 500 plates are widely used in industries where extreme wear protection is required, including:

• Mining & quarrying equipment

• Dump truck bodies, hoppers & liners

• Excavator, loader & bulldozer buckets

• Crushers, chutes, feeders & screens

• Recycling & demolition machinery

• Cement & asphalt plants

• Conveyors & liners for heavy material handling

• Hardox 500 (Sweden)

• Abrex 500 (Japan)

• Raex 500 (Finland)

• Dillidur 500V (Germany)

• Rockhard 500 (INDIA)

Additional Information:

Approx. Rs 82 / KgGet Latest Price

ASME SA537 Class 2 Steel Plate is a heat-treated, pressure vessel quality carbon steel plate supplied in quenched and tempered condition. It offers higher strength and improved notch toughness compared to Class 1, making it suitable for demanding pressure vessel and boiler applications operating at moderate to low temperatures.

• Standard: ASME SA537

• Grade: Class 2

• Product Form: Plate

• Heat Treatment: Quenched & Tempered

• Carbon (C): Max 0.24

• Manganese (Mn): 0.70 – 1.35

• Silicon (Si): 0.15 – 0.50

• Phosphorus (P): Max 0.035

• Sulfur (S): Max 0.035

• Tensile Strength: 620 – 760 MPa

• Yield Strength: Min 415 MPa

• Elongation: Min 20%

• Impact Test: As per ASME requirements

• Thickness: 6 mm to 150 mm

• Width: Up to 3000 mm

• Length: Up to 12000 mm

• Custom sizes available

• ASME SA537

• ASTM A537

• Ultrasonic Testing (UT) available

• Hydro & Impact Testing as per requirement

• High strength pressure vessel steel

• Excellent notch toughness

• Good weldability

• Uniform mechanical properties

• Pressure vessels

• Boilers and heat exchangers

• Storage tanks

• LPG & gas cylinders

• Oil & gas industry equipment

Additional Information:

Approx. Rs 185 / KgGet Latest Price

QUARD 400 is a high-strength, abrasion-resistant (AR) steel plate designed for wear-intensive applications. It offers a nominal hardness of 400 HBW, providing excellent resistance to impact and sliding wear while maintaining good weldability and formability.

• Product Name: QUARD 400 Wear Resistant Plate

• Hardness: 370 – 430 HBW (Typical 400 HBW)

• Thickness Range: 4 mm to 100 mm

• Width: Up to 2500 mm

• Length: Up to 12000 mm

• Standard: EN 10051 / EN 10029

• Delivery Condition: Quenched & Tempered (Q&T)

• Surface: Shot Blasted / Primer Coated (Optional)

• Carbon (C): ~0.12 – 0.20%

• Manganese (Mn): ~1.0 – 1.6%

• Chromium (Cr): ~0.5 – 1.5%

• Nickel (Ni): May be added

• Molybdenum (Mo): May be added
  (Exact composition varies with thickness)

• Nominal Hardness: 400 HBW

• Yield Strength: Approx. 1000 MPa

• Tensile Strength: Approx. 1250 MPa

• Good impact toughness

• Excellent abrasion resistance

• High impact strength

• Good weldability with proper procedures

• Consistent hardness throughout thickness

• Suitable for heavy-duty wear applications

• Mining Equipment

• Dump Truck Bodies

• Excavator Buckets

• Crushers & Screens

• Cement & Steel Plant Equipment

• Earthmoving Machinery

• 3–4 times longer service life

• Reduced maintenance downtime

• Lower replacement cost over time

Additional Information:

Approx. Rs 128 / KgGet Latest Price

Product Name: ASTM A517 Grade F High Strength Alloy Steel Plate
Standard: ASTM A517 / ASME SA517
Grade: F
Specification: Quenched and Tempered Alloy Steel Plate

ASTM A517 Grade F is a high-strength, quenched and tempered alloy steel plate designed for structural applications requiring superior strength and toughness. It offers excellent weldability, high yield strength, and good impact resistance, making it suitable for heavy-duty fabrication and load-bearing structures.

• Carbon (C): 0.12 – 0.20

• Manganese (Mn): 0.70 – 1.60

• Silicon (Si): 0.15 – 0.40

• Chromium (Cr): 0.40 – 0.65

• Molybdenum (Mo): 0.15 – 0.25

• Phosphorus (P): ≤ 0.035

• Sulfur (S): ≤ 0.035

• Tensile Strength: 760 – 895 MPa

• Yield Strength: Minimum 690 MPa

• Elongation: Minimum 16%

• Hardness: Approx. 235 – 293 HB

(Values may vary depending on thickness)

• Thickness: 6 mm to 100 mm

• Width: 1000 mm to 2500 mm

• Length: 3000 mm to 12000 mm

• Custom sizes available as per requirement

• High yield and tensile strength

• Excellent toughness at low temperatures

• Good weldability with proper procedures

• Superior load-bearing capacity

• Suitable for heavy structural applications

• Heavy construction equipment

• Cranes and lifting equipment

• Pressure vessels

• Structural components

• Mining and earthmoving machinery

• Bridges and offshore structures

• As Rolled

• Shot Blasted

• Painted / Primer Coated

• Mill Test Certificate (MTC) as per EN 10204 3.1

• Ultrasonic Testing (UT)

• Third Party Inspection if required

Quenched and Tempered (Q&T)

Additional Information:

Approx. Rs 1,500 / KgGet Latest Price

Approx. Rs 75 / KgGet Latest Price

ASTM A36 is a standard specification for carbon structural steel used in construction, fabrication, and general structural applications. It’s one of the most commonly used grades for mild steel plates due to its excellent weldability, machinability, and strength.

• Excellent weldability and machinability

• Good formability and ductility

• Cost-effective and widely available

• Suitable for bolting, riveting, or welding

• Can be galvanized for corrosion resistance

• Structural beams and columns

• Base plates and gusset plates

• Bridges and buildings

• Machinery parts

• Offshore and onshore structures

• General fabrication and industrial frames

Additional Information:

Approx. Rs 100 / KgGet Latest Price

• Standard: EN 10083 / DIN 17200

• Material No.: 1.1191

• Equivalent Grades:

  • AISI 1045 (USA)

  • JIS S45C (Japan)

  • BS 080M46 (UK)

• Carbon (C): 0.42 – 0.50%

• Silicon (Si): 0.10 – 0.40%

• Manganese (Mn): 0.50 – 0.80%

• Phosphorus (P): ≤ 0.040%

• Sulfur (S): ≤ 0.040%

• Tensile Strength: 570 – 700 MPa

• Yield Strength: ~ 330 MPa

• Elongation: ~16%

• Hardness (Brinell): 170 – 210 HB

Heat-treated conditions (quenched & tempered) can achieve:

• Tensile Strength: up to 800 – 1000 MPa

• Hardness: up to ~ 230 – 280 HB

• Medium tensile strength.

• Good machinability.

• Can be hardened through heat treatment (quenching + tempering).

• Moderate wear resistance.

• Not suitable for welding unless special precautions are taken.

C45 plates are widely used in engineering and machinery applications, such as:

• Gear wheels, shafts, axles

• Bolts, nuts, studs

• Keys and connecting rods

• Bushings and couplings

• Machine tool parts

• Base plates and structural components requiring strength

Additional Information:

Approx. Rs 345 / KgGet Latest Price

Additional Information:

Approx. Rs 145 / KgGet Latest Price

S690QL is a high-strength quenched and tempered structural steel plate conforming to EN 10025-6 standards. It is engineered for applications requiring exceptional load-bearing capacity, high toughness, and reduced structural weight. With a minimum yield strength of 690 MPa, S690QL is ideal for demanding structural and heavy engineering applications.

• Cranes & lifting equipment

• Mining & earth-moving machinery

• Heavy structural fabrication

• Bridges & offshore structures

• Power plants & industrial equipment

• Pressure-loaded and high-stress components

Standard: EN 10025-6
Steel Grade: S690QL
Delivery Condition: Quenched & Tempered (Q&T)
Minimum Yield Strength: 690 MPa

• Thickness: Up to 100 mm

• Width & Length: As per standard and custom requirements

• Surface Finish: As-rolled / Shot blasted / Primed (on request)

• AMNS (ArcelorMittal Nippon Steel)

• JSPL (Jindal Steel & Power Ltd.)

All material is supplied with Mill Test Certificates (MTC) EN 10204 3.1.

Sanjivini Steel is a leading supplier and stockist of S690QL plates, offering a vast variety of sizes and thicknesses up to 100 mm. With strong sourcing from AMNS and JSPL, Sanjivini Steel ensures consistent quality, prompt delivery, and reliable technical support for critical engineering and infrastructure projects.

Additional Information:

Approx. Rs 105 / KgGet Latest Price

Material Grade: S700MC
Standard: EN 10149-2
Product Type: Plate / Sheet
Process: Thermo-Mechanically Controlled Process (TMCP)
Condition: As Rolled

S700MC is a high-strength low-alloy (HSLA) structural steel produced through thermo-mechanical rolling. It offers an excellent combination of high yield strength, good formability, and superior weldability, making it ideal for lightweight structural applications requiring enhanced load-bearing capacity.

S700MC plates are widely used in heavy engineering, transport equipment, cranes, lifting machinery, and structural fabrication where reduced weight and increased strength are essential.

• Minimum yield strength of 700 MPa

• Excellent weldability without preheating (subject to thickness)

• Good cold forming properties

• High strength-to-weight ratio

• Improved impact toughness

• Suitable for structural and load-bearing applications

• Carbon (C): Max 0.12 %

• Manganese (Mn): Max 2.10 %

• Silicon (Si): Max 0.60 %

• Niobium (Nb): Added for strength

• Vanadium (V): Added

• Titanium (Ti): Added

(Low carbon equivalent for better weldability)

• Yield Strength: ≥ 700 MPa

• Tensile Strength: 750 – 950 MPa

• Elongation: ≥ 12 %

• Thickness: 3 mm to 80 mm

• Width: Up to 2500 mm

• Length: Up to 12 meters

• Custom sizes available on request

• Crane booms and lifting equipment

• Truck chassis and trailers

• Heavy-duty transport vehicles

• Structural components

• Earthmoving and mining equipment

Additional Information:

Approx. Rs 87 / KgGet Latest Price

S355J2W+N Plates are high-strength low-alloy structural steel plates with enhanced atmospheric corrosion resistance. The “W” grade offers excellent weathering properties, forming a protective rust layer that reduces maintenance requirements. Supplied in Normalized (+N) condition, these plates ensure improved toughness, uniform mechanical properties, and superior weldability.

• EN 10025-5 S355J2W+N

• Weather Resistant Structural Steel

• Carbon (C): Max 0.16

• Silicon (Si): Max 0.50

• Manganese (Mn): 0.50 – 1.60

• Phosphorus (P): Max 0.035

• Sulfur (S): Max 0.035

• Copper (Cu): 0.25 – 0.55

• Chromium (Cr): Max 0.80

• Nickel (Ni): Max 0.65

• Yield Strength: Min 355 MPa

• Tensile Strength: 470 – 630 MPa

• Elongation: Min 22%

• Impact Test: 27 J at -20°C

• Normalized (+N)

• Thickness: 5 mm to 200 mm

• Width: Up to 3000 mm

• Length: Up to 12000 mm

• EN 10025-5

• Excellent atmospheric corrosion resistance

• High strength and toughness

• Good weldability and formability

• Reduced need for surface coating or painting

• Long service life in outdoor environments

• Bridges and flyovers

• Building facades and structural frameworks

• Railway wagons and containers

• Transmission towers

• Outdoor structures exposed to weather

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price